Optomod indoor cables FRNC/LS0H

Optomod indoor cables FRNC/LS0H

I-K(ZN)H, flame retardant,

FRNC/LSOH sheath	Aramid yarn strain relief	Semi-loose buffer tube
Rip cord	Strength member (GFK)	Fibre

Cable type	2 x 1	4 x 1	6 x 1	8 x 1	10 x 1	12 x 1	16 x 1	20 x 1	24 x 1

nom. cable diameter [mm]	5.9	5.9	5.9	5.9	7.1	7.1	7.8	7.8	9.0

max. weight [kg/km]	37	37	37	37	49	50	63	64	73

min. bending radius [mm]	75	75	75	75	85	85	95	95	100

max. tensile load [N]	700	700	700	700	700	700	700	700	700

max. continuous crush resistance [N/cm]	50	50	50	50	50	50	50	50	50

max. short-term crush resistance [N/cm]	200	200	200	200	200	200	200	200	200

max. fire load [kWh/km]	207	204	201	199	302	299	338	332	464

Type
Optomod I n...x1..., FRNC/LSOH
I-K(ZN)H n...

Applications
Cable for connections between floors, can be laid on cable platforms, parapet ducts, vertical shafts and parapet channels, can be spliced in cable terminal distributors, direct terminal installation

Characteristics
2 - 24 semi-loose buffer tubes Æ 0.9 mm, stranded with filler and strength member, small outside diameter, easy to install, ripcord for opening the sheath

Fire Behaviour
To IEC 332-1 and IEC 332-3, halogen free, flame retardant, FRNC/LS0H, non corrosive fumes

Print
Dätwyler Optomod, fibre count, fibre type, fibre dimension, cable number, meter marks, wave lines receiver

Sheath colour
Violett

Optical Properties
The cable is available with different types of fibre
(see fibre data sheets).

Temperature Range
Operation: -25 °C to +60 °C
EN 187000; method 601

Mechanical Properties

ZTensile performance:
EN 187000 method 501

QCrush resistance:
EN 187000 method 504

Repeated bending:
EN 187000 method 507

Torsion:
EN 187000 method 508

Cable bending:
EN 187000 method 513, test 1

Ordering example:
2 km Optomod-I 24x1 G50, FRNC/LS0H

Technical changes without notice.