Optoversal universal cables for indoor and outdoor use

 optofil

U-DQ(ZN)BH, non-metallic, rodent resistant, flame retardant
Universal cable
pic_1.gif (184 Byte) FR/LS0H sheath pic_3.gif (204 Byte) Rodent resistant pic_5.gif (204 Byte) Loose buffer tube with water repellent material pic_7.gif (200 Byte) Strength member (GFK)
pic_2.gif (207 Byte) Rip cord pic_4.gif (210 Byte) Strain relief (glass) pic_6.gif (202 Byte) Swelling yarn pic_8.gif (220 Byte) 2-12 fibres per tube with primary coating
 
Cable type Optoversal 5 6 8 10 12
max. fibre count
Optoversal 1-4 lower fiber counts		 60 72 96 120 144
max. tube count 5 6 8 10 12
nom. cable diameter [mm] 12.2 12.9 14.2 15.5 17.0
max. weight [kg/km] 168 184 216 250 292
min. bending radius   [mm] 185 195 215 230 255
max. tensile load [N] 6000 6000 6000 6000 6000
max. continuous crush resistance [N/cm] 300 300 300 300 300
max. short-term crush resistance [N/cm] 800 800 800 800 800
max. fire load [kWh/km] 686 756 889 1023 1169
 
Type
Optoversal... x... n, U-DQ(ZN)BH n x m

Applications

Suitable for campus and riser areas, connection cable between main terminal distributors, can be spliced in cable terminal distributors, can be laid on cable platforms, parapet ducts and vertical shafts

Characteristics

 Prevents water penetration, dry intersticials, non-metallic rodent resistant and strain relief combined  (wall strength ³ 1,2 mm), high crush resistance, small outer diameter, light and flexible, ripcords for opening the sheath

 Fire Behaviour

 To IEC 332-1 und 332-3 C, halogen-free, flame retardant  FR/LS0H sheath material, keine non corrosive fumes

Print

 DäTWYLER Optoversal, fibre count, fibre types, cable number, meter marks, wave lines, receiver

Optical Properties

 The cable is available with various fibre types
(see data sheet on fibre types).

Temperature Range

Storage: -25 °C to +70 °C
Installtion: -10 °C to +50 °C
Operation: -25 °C to +60 °C
EN 187000 method   601
Mechanical Properties

 Tensile performance:
EN 187000 method 501

Crush resistance:
EN 187000 method 504

Impact:
EN 187000 method 505

Repeated bending:
EN 187000 method 507

Torsion:
EN 187000 method 508

Cable bending:
EN 187000 method 513

Water penetration:
EN 187000 method 605 B
Ordering example :
2 km Optoversal 6x12 G50
Technical changes without notice
 
06.11.2001