| Mounting Instruction for Optomod |
|
page 2
page 1page
3 
|
|||
page 2 |
|||
|
page 1 |
page
3 |
||
| Tensile
relief: Insert the FO-cable with the distributor into the housing-hole. Slip the added nut on the fibres carefully and bolt the distributor with the housing. Fix the the cable with tie-wraps additionaly. |
 |
| Remove
the dust cover from the ferrule.
See picture: |
 |
| Push
the center sleeve over the ferrule.
|
 |
| Slip
the slitted cap nut on the fibre behind the bending
protection. The collar of the nut points
backwards.
See picture: |
 |
|
page 1 |
page
3 |
Center
sleeve
Dust cover